The Ultimate 

Lone Worker Protection 

Solution

Our fully customizable app combines 25 years of experience in worker safety and the highest development standards  

Automated and fully customizable Alerts triggers

In a danger situation, time is of the essence. The Appsafer App uses all technologies and sensors available on modern smartphones and the most advanced data integrity and deliverability standards to make sure any potential distress situation is transmitted with zero delay to the right person. 

Appsafer

Fall and verticality detection

Using the phone sensors, Appsafer is able to detect a worker's vertical inclination. Associated with a precise and customized setup (precise inclination angle, custom analysis timer...), Appsafer will detect any unusual user position, especially those resulting from a fall (accidents, unconsciousness...) . This event will automatically trigger the right alert process to validate the worker's situation and deploy the rescue actions needed, with zero waste of time. 

Get verticality detection for free >

Appsafer

Immobility detection

Unusual Immobility might be a sign of a critical worker situation (unconsciousness, loss of physical integrity, loss of mobility...).

The immobility detection allows to identify those unusual behaviors, with custom parameters, and triggers an alert if needed.

Get immobility detection for free >

Appsafer

Presence confirmation

With Appsafer, workers assigned to a fixed or sitted workstation are protected too. 

After setting up a periodic reminder, the worker will be asked to confirm his presence and safety, manually.

In case presence is not confirmed in time, the alert process will be triggered.

Get Presence Confirmation for free >

Appsafer

Presence confirmation

With Appsafer, workers assigned to a fixed or sitted workstation are protected too. 

After setting up a periodic reminder, the worker will be asked to confirm his presence and safety, manually.

In case presence is not confirmed in time, the alert process will be triggered.

Get presence confirmation for free >

Appsafer

"Panic mode"

In case of emergency, there might be no time to open the app, look for an SOS button and push it during 15 seconds. To deal with this situation, Appsafer has implemented the "Panic Mode" feature : 

Simply shake the phone to trigger the alert process.

The sensitivity and duration of shaking needed to trigger the alert is, as always, customizable.

Get the "Panic Mode" feature for free >

Appsafer

Unique Precision and customization settings

Appsafer lets you adapt your Lone Worker Protection system exactly to your needs. Each alert / Alarm has 

- An customizable analysys period : a period of time between the trigger of the alert and the actual alert. 

- Customizable parameters for each trigger : angle sensitivity for the verticality trigger, vibration sensitivity for the "Panic mode", periodicity of the presence alert...

-On / Off switch for each trigger depending on how relevant it is for each situation...

try Appsafer for free >

Appsafer

Bidirectional Positive Security

Appsafer safety processes are built on communication between the worker's device and our servers, managing monitoring and alerts.

It happens that in specific situations (malfunctionning device...), this communication is broken in one way or the other (device to server or server to device).

In that case, Appsafer triggers a specific alert that communication is broken. It also triggers an alarm on the workers device that notifies him that he is now off grid. Because being warned raises attention on his own safety, the workers will statistically reduce the risk of accident. 

Try Appsafer for free >

Appsafer

Bidirectional Positive Security

Appsafer safety processes are built on communication between the worker's device and our servers, managing monitoring and alerts.

It happens that in specific situations (malfunctionning device...), this communication is broken in one way or the other (device to server or server to device).

In that case, Appsafer triggers a specific alert that communication is broken. It also triggers an alarm on the workers device that notifies him that he is now off grid. Because being warned raises attention on his own safety, the workers will statistically reduce the risk of accident. 

Protect your workers for free >

Security powered 

by processes optimization

Appsafer Monitoring systems 

and Watcher Role

Based on the best practices, Appsafer provides efficient tools to monitor and control workers activity and danger exposure : 


- Worker-watchers team : each worker can be assigned one or more "Watchers" who can monitor alerts from their own phone. Because a co-worker with site knowledge and clearance is the best person to reach an accident location with no delay, confirm the health state of a victim to the rescue services and grant them access to the site (no remote assistance will be able to play this role with such efficiency).


-Real time control panel (soon available) that will allow one person to monitor a high number of workers at the same time

Try Appsafer for free >

Appsafer

Analysis timer

For each alert trigger, we implemented a customizable "Analyis timer", which is a period of time defined by the user when the trigger is considered "not suspect". 


For example : if we set the analysis timer to 20 seconds on immobility detection, the absence of movement during 20 seconds will not be considered suspect. If the person moves during this period the timer is reset. If the person doesn't move after 20 seconds, a pre-alert is automatically triggered.

Get positive temporisation for free >

Appsafer

Pre-alerts

A great Lone Worker Protection System will create alerts only when necessary. A system that would create wild alerts and flood the Watchers under tens of unnecessary and repeating alerts would be very unproductive and would discredit the hole system.


That is why we created the Pre-alert. A process that starts immediately after the analysis period and during which the situation is considered suspect. The Pre-alert duration can be customized like any other parameter in the app.


A Pre-alert comes with a specific Alarm (sound and buzz) on the worker phone, and a prompt on the screen asking for action. If no action is performed in the pre-alert period, an actual Alert in triggered.  

Try Appsafer for free >

Appsafer

Alerts

When an alert is triggered in Appsafer, all watchers receive a set of detailed information directly on their phone : 

- Endangered worker identity with medical information

- A direct link to call the worker 

- precise location of the worker on the map (outdoor and indoor) 

- A direct link to a map app with the itinerary to the worker's location 


At the same time,  a powerful alarm is triggered on the worker's phone (very high volume).

Get positive temporisation for free >

Appsafer Alarms

All Appsafer alerts are in pair with visual and sound alarms directly on the worker's phone. That way, workers are aware that  : 

- A pre- alert has been triggered

- An alert has been triggered and rescue is on its way 


Alarms are also triggered in the following cases to raise worker's awareness : 

- No internet network connection

- No bluetooth network connection

- No GPS connection

- Low battery

- Watcher alarm

- Bidirectionnal connection issues (device to server / server to device)


Get positive temporisation for free >

Appsafer

"Off-Grid" Mode

When a worker knows that he is going off-grid (for example : the worker has to enter a vault  for 5 minutes where communication is not possible), he is allowed to set an "off grid timer". 

That way, all analysis, pre-alerts and alerts are turned off until the end of the timer 

Watchers will be alerted if no communication is received at the end of the "off grid timer"


This prevents flooding the system with alerts in case of planned "off grid" situations

Get positive temporisation for free >

Appsafer

"Private Life" Mode

Balance between safety and private life is crucial. 

Appsafer tracks all workers locations in real time. 

However, in some situations, workers will not agree being tracked. To avoid sabotaging, Appsafer allows to stop real time tracking with the "Private life" mode. 


But no worries, in "Private Life" mode, all phone sensors stay active. In case of alert, location tracking will be automatically turned back on.

Try Appsafer for free >

Appsafer

"Private Life" Mode

Balance between safety and private life is crucial. 

Appsafer tracks all workers locations in real time. 

However, in some situations, workers will not agree being tracked. To avoid sabotaging, Appsafer allows to stop real time tracking with the "Private life" mode. 


But no worries, in "Private Life" mode, all phone sensors stay active. In case of alert, location tracking will be automatically turned back on.

Try Appsafer for free >

Security powered 

by technology

Appsafer 

Indoor positionning 

and IOT compatibility 

Appsafer is compatible with all communication technologies, including Bluetooth. 
Any IOT device and sensors can be plugged on the system to generate custom alerts to meet your exact needs, including : 

- BLE Beacons for precise indoor positioning (our monitoring system allows you to upload you building map and follow beacon activation visually in real time)

-Sigfox network compatibility

- Connected watches (available soon) to monitor all allowed data (including heart beat rythm, electrocardiogram etc..
- Other IOT devices : need temperature alerts ? Water leak detection ?  Movement detection ? Humidity level detection?... Just plug your device on Appsafer  and start receiving alerts compatible with most devices

Managing IOT devicesCreating Cutom IOT Devices Triggers and alerts

Creating Custom IOT Devices Triggers and alerts

Try Appsafer for free >

Appsafer 

GPS geolocalisation

This is a must have. And we have it of course. 

Appsafer protected workers location is tracked in real time via GPS. 


We know where your protected workers are at all time (except if "Private mode" is activated) and share this information with you.

Try Appsafer for free >Try 

Appsafer 

GPS geolocalisation

This is a must have. And we have it of course. 

Appsafer protected workers location is tracked in real time via GPS. 


We know where your protected workers are at all time (except if "Private mode" is activated) and share this information with you.

Try Appsafer for free >Try 

Appsafer 

API Access 

At Appsafer, we value fully customized services. However, in some case, you will want to go further to integrate our solutions in your own development environment.


To that extent, we allow you you get full access to your API's. That way, you can benefit from all or part of our technical resources in your inhouse information system

Get an API access for free >

Appsafer 

API Access 

At Appsafer, we value fully customized services. However, in some case, you will want to go further to integrate our solutions in your own development environment.


To that extent, we allow you you get full access to your API's. That way, you can benefit from all or part of our technical resources in your inhouse information system

Get an API access for free >